|
780nm 40G Picosecond Laser Series
Calmar Optcom has extended its family of picosecond fiber lasers with the addition of 780nm 40 GHz fiber lasers.
These ultrafast lasers provide researchers with the ability to test their components and networks at very high speeds.
Pulse repetition rates as high as 160GHz, and even 640GHz, can be achieved when Calmar's fiber laser is used
with Calmar's Bit Rate Multiplier.
The unique design of Calmar's 40GHz lasers enable users to tune the wavelength throughout the 765~780nm region.
Calmar's fiber lasers are known for their low timing jitter and low amplitude noise, and both 40GHz lasers
feature the same high performance, thereby ensuring that the quality of the laser output meets even the most
stringent test requirements.
- Pulse width <1.5ps
- Repetition rate adjustment 38~41GHz
- Wavelength tunability 765~780nm
- Average output power >25mW
- Low timing jitter
- Automatic and manual mode-locking
- Easy operation
| Model |
PSL-4R-FF |
PSL-4R-PF |
PSL-4R-FT |
PSL-4R-PT |
| Pulse Width |
<1.5ps |
<1.5ps |
<1.5ps |
<1.5ps |
| Operating Wavelength |
780nm typical |
780nm typical |
765~780nm |
765~780nm |
| Output Power at 40GHz |
>25mW |
>12mW |
>20mW |
>10mW |
| Output Interface |
Free Space* |
Fiber Pigtail |
Free Space* |
Fiber Pigtail |
| Repetiton Rate |
38~41GHz |
| Timing Jitter |
<100fs |
| Amplitude Noise |
<1.5% |
| Operating Temperature |
15~30°C |
| Operating Voltage |
85~264VAC, 48~63Hz |
| Dimensions |
48x42x9cm |
| Electrical Driver available upon request. |
Specifications are subject to change without notice.
- Computer control
- Front panel pulse width adjuster
- Very wide repetition rate range (2~45GHz)
|
