|
1μm Femtosecond Pulsed Fiber Laser Module
Calmar Optcom's FPL-M1U is a 1μm seed laser module and FPL-M2U is an amplified version of FPL-M1U with optical power
>20mW. The most compact optical pulse generators, FPL-M1U and FPL-M2U are air-cooled and shockproof. They can be either
used as stand-alond laser sources with 1 +5VDC power supply (or a separate driver), or as OEM modules to be integrated into
end-user's application systems. Both modules are passively mode-locked fiber lasers, feature wide range of pulse widths,
wavelengths, and high output power.
FPL-M1U has transform-limited pulse shape with low pedestals. The timing jitter from the module is less than 100fs. It can
generate optical pulses in the range of 0.3~10ps. The optical wavelength can be customized throughout the range of 1.03~1.07μm.
As stand-alone laser sources, FPL-M1U and FPL-M2U are simple to operate. With the built-in electronic driver, they self-start
and are remotely controllable. In addition, the built-in RF synchronization output provides tigger signals. As the result, the
operation is turn-key and requires neither external RF source nor warm-up.
Due to the small form factor and ruggedized design, FPL-M1U and FPL-M2U are ideal for maintenance free OEM appliations. We can
customize the interface to allow direct system integration with no requirement for adjustment.
- Pulse width 0.4~10ps selectable
- Wavelength 1030~1070nm selectable
- Transform-limited output from seed laser
- Synchronization output (SMA female)
- Small form factor
- Polarization maintaining
- Low pedestal
- No Warm-up time required
- No external RF source required
| Model |
FPL-M1UFF |
FPL-M2UFF |
| Pulse Width |
0.4~10ps (selectable) |
0.8~10ps (selectable, 0.2ps compressable) |
| Wavelength |
1030~1070nm (selectable) |
| Repetition Rate |
40MHz
(Other repetition rate within 20~100MHZ available) |
| Average Output Power |
>0.5mW |
>10mW (20mW typical) |
| Timing Jitter |
<100fs (carrier offset 100~1MHz) |
| Polarization Extinction Ratio |
>20dB |
| Spectral Width |
5~20nm |
| Operating Temperature |
5~40°C |
| Operating Voltage |
4.5~5.5VDC |
| Dimensions |
9.5x12.7x2.0cm |
9.5x12.7x4.0cm |
Specifications are subject to change without notice.
- Pulse locking to external RF clock with ultra low jitter
- Synchronization output with >3GHz or customized bandwidth
|
