|
Erbium Doped Fiber Amplifier (EDFA) Module
In addition to our EDFA bench top systems, Calmar Optcom has developed a series of small form fact Erbium-Doped Fiber
Amplifier OEM modules in response to industrial requests of system integration. The module is driven by a +5VDC power supply.
End users have full access and control of the pump laser current thus the EDFA output power.
The polarization maintaining EDFA module series ensures the output of the amplifier linearly polarized, while providing up
to 32dB of amplification.
The wide range of EDFA module available from Calmar makes its possible to customize a solution that closely fits into end user&39;s
application system.
- Small signal gain 25~35dB
- Saturated output power 15~23dBm
- Wavelength range 1530~1565nm
- Input power range -25~+10dBm
- Low noise figures
- Polarization extinction ratio >22dB
- Easy configuration and operation
- Long term stability
| Polarization Maintaining EDFA Module |
| Model |
AMP-PM15M |
AMP-PM17M |
AMP-PM20M |
AMP-PM23M |
| Saturated Output Power |
15dBm |
17dBm |
20dBm |
23dBm |
| Small Signal Gain |
25dB |
30dB |
35dB |
35dB |
| Noise Figure |
<5.0dB |
<5.5dB |
<6.5dB |
<6.5dB |
| Wavelength Range |
1530~1565nm |
| Input Power Range |
-25~+10dBm |
| Polarization Extinction Ratio |
>22dB |
| Operating Voltage |
85~264VAC, 47~63Hz |
| Dimensions |
9.5x12.7x2.0cm |
| Non-Polarization Maintaining EDFA Module |
| Model |
AMP-ST15M |
AMP-ST17M |
AMP-ST20M |
AMP-ST23M |
| Saturated Output Power |
15dBm |
17dBm |
20dBm |
23dBm |
| Small Signal Gain |
25dB |
30dB |
35dB |
35dB |
| Noise Figure |
<4.5dB |
<5.0dB |
<6.0dB |
<6.0dB |
| Wavelength Range |
1530~1565nm |
| Input Power Range |
-25~+10dBm |
| Operating Voltage |
85~264VAC, 47~63Hz |
| Dimensions |
9.5x12.7x2.0cm |
Specifications are subject to change without notice.
|
