|
Erbium Doped Fiber Amplifier (EDFA) Series
AMP-LD is a series of bench-top low-dispersion fiber amplifiers. In high-speed transmission systems or experiments,
the short pulse signals (picosecond / femtosecond) turn to get dispersed after amplification, causing higher error rate.
By taking special care of the fiber design and arrangement, AMP-LD amplifies the input signal while minimize the signal
dispersion.
AMP-PM is a series of bench-top polarization-maintenance fiber amplifiers. It amplifies the input
signal while maintaining the input polarization, ideal for telecom R&D such as high-speed transmission and
optical switching.
| AMP-LD Series |
| Model |
AMP-LD-15 |
AMP-LD-17 |
AMP-LD-20 |
AMP-LD-23 |
| Saturated Output Power |
15dBm |
17dBm |
20dBm |
23dBm |
| Small Signal Gain |
25dB |
30dB |
35dB |
35dB |
| Noise Figure |
<4.5dB |
<5.5dB |
<6.0dB |
<6.0dB |
| Wavelength Range |
1530~1565nm |
| Chromatic Dispersion |
<0.03ps/nm |
| Input Power Range |
-25~+10dBm |
| Operating Voltage |
85~264VAC, 47~63Hz |
| Dimensions |
37(w)x16(d)x25(h)cm |
| AMP-PM Series |
| Model |
AMP-PM-18 |
AMP-PM-22 |
AMP-PM-30 |
AMP-PM-37 |
| Saturated Output Power |
18dBm |
22dBm |
30dBm |
37dBm |
| Noise Figure |
<5.5dB |
<6.0dB |
<6.0dB |
<6.0dB |
| Wavelength Range |
1530~1565nm |
1540~1567nm |
1540~1570nm |
| Input Power Range |
-25~+10dBm |
0~+3dBm |
| Polarization Extinction |
>17dB |
| Operating Voltage |
85~264VAC, 47~63Hz |
| Dimensions |
35(w)x25(d)x12(h)cm |
Specifications are subject to change without notice.
|
